Pics of EBAY tour pack LED light bar.

[Garemlin]

Originally Posted by HarleyArcher

I cannot find the seller on ebay using T-Motorsports. Any other ideas??

Yeah I just looked too. No results. Got a link to the auction???

[Bill H]

ok...,gold3288gold is his seller name. the part # for these is CFP-HL584-006-BLACK
do a google on these, they also sell them in chrome as was posted on here earlier.
http://cgi.ebay.com/ws/eBayISAPI.dll...m=150925790622 is his current auction, I got lucky on the one that I bought...I was the only bidder. You can also get these at amazon for $129.95 from this same guy. Here is his web site http://www.t-motorsports.com/led-tai...-around-black/

[Garemlin]

Aret hese OEM or some sort of aftermarket deal?

[Bill H]

These are aftermarket. no template included, like I said I just put a piece of tape and pressed on the lenses to make an impression to where to drill at.

[ckhismine]

What would one have to do to remount the antennas ? This looks good but I want to reuse my antennas.

[Bill H]

All you have to do is take your stock antenna's and remove the part that your antenna cables screw onto. This will unscrew then pull out the masts and posts. Reinstall them into the new light bar and screw the cable ends back onto the posts then install light bar then cables. I didn't know that the factory antenna mounts were in seperate pieces until looking at the directions for the factory light bar and parts breakdown listing.
I am installing these today, the HD hidden antenna sucks with HID lights. I will post a pic after I install these today. Hope this helps anyone who is interested.

[reficul]

Super bright. Looks good

[ckhismine]

Thank you Bill H. I am thinking of getting one of these.

[Bill H]

I did have to cut off 3/4" from the bottom of the antenna posts, maybe the HD ones for the light bars are shorter than the stand-alone antennas. Other than that they fit perfectly. Just a note though...don't use nylock nuts, if you have to remove the light bar the nuts will pull out the screw in studs in the light bar....ask me how I know this!!! No problem reinstalling them in the light bar though...just a small set back when I installed the antennas and had to remove the end nuts to install the reinforcing plates for the antenna corners, and had to remove the light bar instead of just the nuts.

[ckhismine]

Originally Posted by Bill H

I did have to cut off 3/4" from the bottom of the antenna posts, maybe the HD ones for the light bars are shorter than the stand-alone antennas. Other than that they fit perfectly. Just a note though...don't use nylock nuts, if you have to remove the light bar the nuts will pull out the screw in studs in the light bar....ask me how I know this!!! No problem reinstalling them in the light bar though...just a small set back when I installed the antennas and had to remove the end nuts to install the reinforcing plates for the antenna corners, and had to remove the light bar instead of just the nuts.

Now that is good to know. Thanks.