Originally Posted by tmd
You'll be hard pressed to find a dealer or even a muffler shop to remove the cat because it is a violation of federal law to tamper with exhaust emissions. All you really need is a hacksaw, a chisel, and someone to weld it back together.
Most every Dealer will point you to someome that will gut the headers.
It is aginst the law to modify any exhaust system. So far many still do it.
That is why the products are sold as racing.
That was why JJ left CA he was fined big time for exhaust on the bikes he built.
Gutting the stock headers is easy to do but you better get the tune right of the do not run well.
I gave up on the low cost route after the last one. This time it will be Fuel Moto cermic line 2-1-2 headers doing it right this time