How to Install New Cams & Adjustable Push Rods

[Rkfltrx]

Nice write up! Which Woods cams did you go with?

[Wildman]

Thanks I need to go back and add a few things. I got a TW-555 cam since when I bought mine the TW-222 wasn't released yet and the TW-555 was what worked. I have only gotten to go for one ride since I did the cams due to winter type weather.

[Dhambrick]

What was the total time invested in the cam R&R?

Great write up BTW!

[Q-Hog]

Thx for the write up. It will definetly be helpful.

[Ironrider]

Great job will help when I do mine

Sent from my MB860 using Motorcycle.com Free App

[Wildman]

Originally Posted by Dhambrick

What was the total time invested in the cam R&R?

Great write up BTW!

I took my time doing it and spent 3 days total working on the bike. I can only work about 4-6 hours at a time and then I have to take a break.

[bambamortiz]

thanks for the write up.

[Bill H]

Thanks for the pictorial!! I am going to be installing the TW222's in my ride after the 1st of the year.

[dwighop]

Keith told me 4 turns for the preload which would be 24 sides. Wonder which it should be?

[dwighop]

So I finished the install last night with mostly the help of this forum. Started up fine but a little rough on idle. A lot of fluctuation in idling. I'm using a pcv with a new map from fuelmoto. Do I just need to tweak my map or did I miss something? If I need to fix something on the map I am absolutely clueless but willing to learn.