issue with 2-1-2 headpipe

[fuelmoto]

Originally Posted by sloride

Hey Jamie,

Thanks for getting back with us.

The only issue I would have with this is that the external coating was 2.5 to 3 mils thick.

The internal coating was only about + or - 1 mill thick.

should't the coatings be the same thickness inside and out

The coating on our pipe has different thickness internal/external and HTC is a proprietary process developed for our specific application and grade of stainless material. This has also been well tested and proven. We even warranty the coating. For technical info you are welcome to contact me on Wednesday

[sloride]

Originally Posted by fuelmoto

The coating on our pipe has different thickness internal/external and HTC is a proprietary process developed for our specific application and grade of stainless material. This has also been well tested and proven. We even warranty the coating. For technical info you are welcome to contact me on Wednesday

Good enough Jamie, you are a man of your word.

Let the install begin....

Thanks Jamie for the clearifications

[ChivoChavez321]

Thanks Sloride and Jamie!