Engine light

08gezzer · #1 11-24-2012, 05:26 PM

I installed a pcv in my 08 , when i first start it the engine light stays on for a minute , i dont start it till the light goes out , but once it is running the light comes back on then goes back out in a minute or so , is this normal ? I do have the 02 sensors unplugged with the caps on the wires

Sent from my iPhone using Motorcycle.com App

Triplej · #2 11-24-2012, 05:36 PM

Sounds like you may have thrown a diagnostic codes.

Have a look here on how to check for codes.

http://www.roadglide.org/showthread.php?t=4439

If you happen to find any codes this thread will help explain them.

http://www.roadglide.org/showthread.php?t=5748

If you do get any codes you can reset them and see if they reappear.

08gezzer · #3 11-24-2012, 07:59 PM

I will have a look at it to see
Saw somewhere else that upluging the ubs cord while the bike is running could cause it to set a code

Sent from my iPhone using Motorcycle.com App

Harleyagain · #4 11-24-2012, 10:13 PM

[QUOTE=Triplej;337321]Sounds like you may have thrown a diagnostic codes.

Have a look here on how to check for codes.

http://www.roadglide.org/showthread.php?t=4439

If you happen to find any codes this thread will help explain them.

http://www.roadglide.org/showthread.php?t=5748

If you do get any codes you can reset them and see if they reappear.[/

Ya what he said