Ok, had engine light codes u106,p0120,p0220,p0222,p0373,p1510 & p1511
Cleared codes bike wouldnt start , disconected pcv bike started no codes ?
Might send pcv back and try and talk the boss into a power vision instead
Any one think its a pcv problem ?
Ok, had engine light codes u106,p0120,p0220,p0222,p0373,p1510 & p1511
Cleared codes bike wouldnt start , disconected pcv bike started no codes ?
Might send pcv back and try and talk the boss into a power vision instead
Any one think its a pcv problem ?
Dont sound like a bad pc just sounds like a loose connection. I would try to reconnect and make sure all is snug and tight. Also, did you disconnect the oxygen sensors BEFORE you started the bike? That will cause issues and wont allow it to start. It says to do that in the instructions. Also, did you have a fuel map installed on the pc?
__________________
2012 RGC...Stage I? DONE!! Cams? DONE!!! Heard someone ask what kind of helicopter was that flying around. He thought it was a Huey...he then found out that was my bike sitting around the side of the building at idle!!...True story...
__________________
2012 RGC...Stage I? DONE!! Cams? DONE!!! Heard someone ask what kind of helicopter was that flying around. He thought it was a Huey...he then found out that was my bike sitting around the side of the building at idle!!...True story...
Pcv trouble
Linear Mode
