14" Santee owners - your brake line routing? - Road Glide Forums
Road Glide Forums






Go Back   Road Glide Forums > Road Glide Specific Discussions > Controls & Handlebars

Controls & Handlebars Controls and Handlebars for Road Glides


Advertisement
Order T-Shirts Here

Motorcycle Superstore

Make sure to Visit our Sponsors. They keep this site FREE!








Partner Links


Motorcycle Superstore









 
Reply
 
Thread Tools Display Modes
  #1  
Old 12-23-2012, 11:22 AM
TitusPollo's Avatar
TitusPollo TitusPollo is offline
Hangaround
 
Join Date: Nov 2012
Location: KCMO
Posts: 129
Default 14" Santee owners - your brake line routing?

Got bike back together yesterday but, I'm not real happy with how I had to run the brake line. Right now, it runs behind the forks, around the right side fork shroud, then up to the lever (spiraling as it goes up which looks ugly to me). It moves quite a bit during lock to lock turning, causing it to hit the inner fairing and such. I used a rubber coated cable holder on the top fork shroud bolt to help keep the hose from rubbing on the inner fairing. How do you have yours routed?

(and NO that's not cocaine on the glove box!!!! It's baby powder that has fallen out of the bars after pulling wires)



The clutch cable (+6) looks more natural (I believe it is pretty close to stock location) but it doesn't quite line up at the clutch perch. I tried using the little plastic cable holder that attaches cable to side of gauge housing but the cable doesn't like to be restricted like that and rips the cable holder out of the housing.


__________________
http://www.roadglide.org/signaturepics/sigpic10986_3.gif
2012 RG ULTRA - V&H Slip-Ons - 14" Santee apes & a decatted head pipe
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
  #2  
Old 12-26-2012, 08:23 PM
TitusPollo's Avatar
TitusPollo TitusPollo is offline
Hangaround
 
Join Date: Nov 2012
Location: KCMO
Posts: 129
Default

One bump and I will let it fall into the abyss...
__________________
http://www.roadglide.org/signaturepics/sigpic10986_3.gif
2012 RG ULTRA - V&H Slip-Ons - 14" Santee apes & a decatted head pipe
Reply With Quote Quick reply to this message
  #3  
Old 12-26-2012, 09:14 PM
Chromehorse96's Avatar
Chromehorse96 Chromehorse96 is offline
Newbie
 
Join Date: Jun 2012
Location: NE Oklahoma
Posts: 38
Default

I'd love to be able to chime in and shed light on this for you but I'm in the same boat right now. I find it very interesting however that plenty of folks talk of rerouting this cable or line and changing the clutch cable once in a while but finding threads or posts about changing the brake lines are hard to find. My searching skills aren't the best though. Good luck.
Reply With Quote Quick reply to this message
  #4  
Old 12-26-2012, 09:29 PM
TitusPollo's Avatar
TitusPollo TitusPollo is offline
Hangaround
 
Join Date: Nov 2012
Location: KCMO
Posts: 129
Default

I am pretty good about searches but I sure can't find anyone describing routing issues with the OEM brake line. I have searched for several days and have decided to give up. Tomorrow after work, I'm going to attempt to bleed the front brakes and call it good. Or at least good until I can ride it and see how things react. I almost wander if heat (like sitting in the sun) would make the hose relax and fit more comfortably.

If no one else chimes in, or I find a solution, I will chime in here.
__________________
http://www.roadglide.org/signaturepics/sigpic10986_3.gif
2012 RG ULTRA - V&H Slip-Ons - 14" Santee apes & a decatted head pipe
Reply With Quote Quick reply to this message
  #5  
Old 12-27-2012, 02:02 PM
redbeard719's Avatar
redbeard719 redbeard719 is offline
Prospect
 
Join Date: Sep 2012
Location: On the Front Range, CO
Posts: 200
Default

Are you able to remove the MC and rotate it to remove the twist from the line?

I don't have the same bars or the same lines, but it might help. G'Luck...
Reply With Quote Quick reply to this message
  #6  
Old 12-28-2012, 09:52 PM
WIKD1's Avatar
WIKD1 WIKD1 is offline
Hangaround
 
Join Date: Aug 2012
Location: Central Florida
Posts: 67
Default

On mine I had to replace the clutch cable with a + 4" cable and routed it the same as stock. As for the brake line mine is stock. Runs up on the forward side of the fork cover and then straight to the lever. Just loosened the banjo a little bit and rotated it slightly to look better. No fluid loss and no bleeding needed. Hope that answers your question.
__________________
2012 HD Road Glide

Brotherhood Above All.
Reply With Quote Quick reply to this message
  #7  
Old 12-29-2012, 01:23 AM
Illiniroads's Avatar
Illiniroads Illiniroads is offline
Grey beard
 
Join Date: Dec 2011
Location: Godfrey, Illinois
Posts: 1,128
Default

Can you take a picture showing more of the bike?
__________________

2012 RGC BIG Blue Pearl SE Stage II 95hp 107tq
2011 RS-S Can Am Spyder 106hp 77tq
Reply With Quote Quick reply to this message
  #8  
Old 12-30-2012, 09:18 AM
TitusPollo's Avatar
TitusPollo TitusPollo is offline
Hangaround
 
Join Date: Nov 2012
Location: KCMO
Posts: 129
Default

Quote:
Originally Posted by WIKD1 View Post
On mine I had to replace the clutch cable with a + 4" cable and routed it the same as stock. As for the brake line mine is stock. Runs up on the forward side of the fork cover and then straight to the lever. Just loosened the banjo a little bit and rotated it slightly to look better. No fluid loss and no bleeding needed. Hope that answers your question.
If I run the brake line forward of the fork cover, and then up to the controls, it is too short and won't turn to lock on left side (as well as rubbing on lots of stuff during lock to lock turning).
__________________
http://www.roadglide.org/signaturepics/sigpic10986_3.gif
2012 RG ULTRA - V&H Slip-Ons - 14" Santee apes & a decatted head pipe
Reply With Quote Quick reply to this message
  #9  
Old 12-30-2012, 09:24 AM
TitusPollo's Avatar
TitusPollo TitusPollo is offline
Hangaround
 
Join Date: Nov 2012
Location: KCMO
Posts: 129
Default

Quote:
Originally Posted by Illiniroads View Post
Can you take a picture showing more of the bike?
I can get some more pictures this morning. Are you wanting general pictures to get an idea of what the 14" looks like on the bike or are you wanting more pictures of the brake hose conundrum?
__________________
http://www.roadglide.org/signaturepics/sigpic10986_3.gif
2012 RG ULTRA - V&H Slip-Ons - 14" Santee apes & a decatted head pipe
Reply With Quote Quick reply to this message
  #10  
Old 12-30-2012, 09:00 PM
TitusPollo's Avatar
TitusPollo TitusPollo is offline
Hangaround
 
Join Date: Nov 2012
Location: KCMO
Posts: 129
Default

Quote:
Originally Posted by redbeard719 View Post
Are you able to remove the MC and rotate it to remove the twist from the line?

I don't have the same bars or the same lines, but it might help. G'Luck...
Tried multiple configurations and then detached the brake hose and twisted and turned the banjo bolt every way possible but never could find a position where the hose felt "less taught" or not touching multiple things during lock to lock swing.
__________________
http://www.roadglide.org/signaturepics/sigpic10986_3.gif
2012 RG ULTRA - V&H Slip-Ons - 14" Santee apes & a decatted head pipe
Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Road Glide Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


 


All times are GMT -5. The time now is 02:19 AM.



Design By: Miner Skinz.com
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
H-D, Harley-Davidson, and Harley-Davidson Logos are registered trademarks of H-D Michigan, Inc. Harley-Davidson in no way endorses or is affiliated with this site.