Heated Seat Question - Road Glide Forums
Road Glide Forums






Go Back   Road Glide Forums > Road Glide Specific Discussions > Seating: seats, backrests

Seating: seats, backrests SEATING: seats, backrests for Road Glides


Advertisement
Order T-Shirts Here

Motorcycle Superstore

Make sure to Visit our Sponsors. They keep this site FREE!








Partner Links


Motorcycle Superstore









 
Reply
 
Thread Tools Display Modes
  #1  
Old 01-02-2013, 11:03 AM
Triplej's Avatar
Triplej Triplej is online now
Life Member
 
Join Date: Oct 2011
Location: Frisco, TX
Posts: 4,767
Default Heated Seat Question

For those of you using the HD Heated Seats, how long should it take for the seat to actually heat up to where you can really tell it is working?

I am looking at possibly purchasing a used heated seat from a CVO model and I can tell it is starting to heat up with the bike running in a few minutes but it does not seem to get all that warm. Does it take a while before you can feel the warmth or am I possibly looking at a seat with heating element issues?

Thanks in advance!
__________________
2012 RGU / Big Blue Pearl / Woods TW222 Cams / Fuel Moto Ceramic 2-1-2 Headpipe / Fuel Moto 4.5" Pro Touring Mufflers / Fuel Moto Stage 1 A/C / Power Vision Tuner / Heritage Bars / Seat Mod by MCC /Rider and Passenger Bead Riders / BAL Tail Light / 12" & 14" Windvest / Sancho's wings / Iron Aces Phone Mount / Rear Fascia Upgrade / Avon Grips / Mean Mug by Gas Capital Customs
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
  #2  
Old 01-02-2013, 06:47 PM
Ohiobellboy's Avatar
Ohiobellboy Ohiobellboy is offline
Life Member
 
Join Date: Nov 2012
Location: Canton, oHIo
Posts: 2,174
Default

Mine likes to roast the boys within about 8 minutes on high and that's riding below 50*. I can tolerate it on low after that for about another 10 minutes and then I'm turning it off. My wife on the other hand can ride with that damn thing on all day it seems.
__________________
A.K.A OBB
Check out the Ohio Glide Riders community page:http://www.roadglide.org/group.php?groupid=21
Reply With Quote Quick reply to this message
  #3  
Old 01-02-2013, 06:50 PM
Triplej's Avatar
Triplej Triplej is online now
Life Member
 
Join Date: Oct 2011
Location: Frisco, TX
Posts: 4,767
Default

Thanks for the reply. I finally got a chance to try it out a little longer and it never got more than slightly warm. Must be on its way out. Good thing I got a chance to try before buy
__________________
2012 RGU / Big Blue Pearl / Woods TW222 Cams / Fuel Moto Ceramic 2-1-2 Headpipe / Fuel Moto 4.5" Pro Touring Mufflers / Fuel Moto Stage 1 A/C / Power Vision Tuner / Heritage Bars / Seat Mod by MCC /Rider and Passenger Bead Riders / BAL Tail Light / 12" & 14" Windvest / Sancho's wings / Iron Aces Phone Mount / Rear Fascia Upgrade / Avon Grips / Mean Mug by Gas Capital Customs
Reply With Quote Quick reply to this message
  #4  
Old 01-03-2013, 02:34 AM
Ohiobellboy's Avatar
Ohiobellboy Ohiobellboy is offline
Life Member
 
Join Date: Nov 2012
Location: Canton, oHIo
Posts: 2,174
Default

Just curious on how it was wired to your bike. With mine being a CVO it's factory that way. I've read a lot where people have added them and powered them through the acc switch. I wonder if the voltage is different through that switch although I don't really understand how it could be.
__________________
A.K.A OBB
Check out the Ohio Glide Riders community page:http://www.roadglide.org/group.php?groupid=21
Reply With Quote Quick reply to this message
  #5  
Old 01-03-2013, 05:21 AM
RichieRichMRMC's Avatar
RichieRichMRMC RichieRichMRMC is online now
Life Member
 
Join Date: Aug 2012
Location: San Diego, CA
Posts: 4,228
Default

Quote:
Originally Posted by Ohiobellboy View Post
Just curious on how it was wired to your bike. With mine being a CVO it's factory that way. I've read a lot where people have added them and powered them through the acc switch. I wonder if the voltage is different through that switch although I don't really understand how it could be.
The accessory port is the same voltage as wiring something direct to the battery. The heated seat I have came with a factory style connector that plugs directly into the accessory port.
__________________
2013 BBP FLTRX
Owner/Operator of "Papa Smurf"
Reply With Quote Quick reply to this message
  #6  
Old 01-03-2013, 05:37 AM
Ohiobellboy's Avatar
Ohiobellboy Ohiobellboy is offline
Life Member
 
Join Date: Nov 2012
Location: Canton, oHIo
Posts: 2,174
Default

Quote:
Originally Posted by RichieRichMRMC View Post
The accessory port is the same voltage as wiring something direct to the battery. The heated seat I have came with a factory style connector that plugs directly into the accessory port.
I figured it would be but never checked so I thought I'd throw that out there.
__________________
A.K.A OBB
Check out the Ohio Glide Riders community page:http://www.roadglide.org/group.php?groupid=21
Reply With Quote Quick reply to this message
  #7  
Old 01-03-2013, 07:29 AM
Triplej's Avatar
Triplej Triplej is online now
Life Member
 
Join Date: Oct 2011
Location: Frisco, TX
Posts: 4,767
Default

The accessory plug is where I had it plugged in.
__________________
2012 RGU / Big Blue Pearl / Woods TW222 Cams / Fuel Moto Ceramic 2-1-2 Headpipe / Fuel Moto 4.5" Pro Touring Mufflers / Fuel Moto Stage 1 A/C / Power Vision Tuner / Heritage Bars / Seat Mod by MCC /Rider and Passenger Bead Riders / BAL Tail Light / 12" & 14" Windvest / Sancho's wings / Iron Aces Phone Mount / Rear Fascia Upgrade / Avon Grips / Mean Mug by Gas Capital Customs
Reply With Quote Quick reply to this message
  #8  
Old 01-03-2013, 08:56 AM
Illiniroads's Avatar
Illiniroads Illiniroads is offline
Grey beard
 
Join Date: Dec 2011
Location: Godfrey, Illinois
Posts: 1,128
Default

Post toasty in about 10 minutes thru acc. Switch. I have the Sunray model. It adds about 2" to the height of the custom seat.
__________________

2012 RGC BIG Blue Pearl SE Stage II 95hp 107tq
2011 RS-S Can Am Spyder 106hp 77tq
Reply With Quote Quick reply to this message
  #9  
Old 01-03-2013, 09:12 AM
ROADEAGLE ROADEAGLE is offline
Prospect
 
Join Date: Feb 2010
Location: Raleigh N.C.
Posts: 250
Default

You can make the seat You have heat

http://www.sargentcycle.com/harley.htm

Don't compromise when it comes to comfort. Our DIYHEAT Seat Heater System features our FINE WIRETM heat pad - designed specifically for motorcycle seats - and our exclusive ChilliTM Controller which offers full range heat, not just one or two settings like competing products.
The high-tech SARGENT Heat Controller provides the ultimate heat control - from high to low and anywhere in between. And, the adjustable power and brightness settings are displayed in a LED bar graph that shows the exact temperature setting day or night. It's completely water-proof and can easily be mounted anywhere within reach. It is small yet easily adjusted - even with a gloved hand. And, thanks to its pulse modulating technology, it isn't affected by ambiant temperatures.



Our FINE WIRE heat pad is thin, unobtrusive and virtually undetectable. In addtion, its shape is designed to fit the unique contours common to most motorcycle seats. This kit is designed for do-it-yoursef installation*

Kit includes components for one seating area:

One Fine Wire Heat Pad
One Chilli Electronic Controller
SAE Wiring
Splice Connectors
Peel and Stick Adhesive
Installation Instructions (Preview HERE)
*Re-installation of seat cover may require use of high power pneumatic staple gun or professional upholstery shop assistance. Professional installation is highly recomended or may be required for button fitted seats.

POWER DRAW. Each heated seating area (front or rear) is supplied with its own heat controller. Each heated zone draws approximately 2 amps (or 24 watts), and dual zone installations will draw approximately 4 amps (or 48 watts) at full pow

Works Great Easy install and you can adjust the heat any way you want
__________________
Reply With Quote Quick reply to this message
  #10  
Old 01-03-2013, 09:17 AM
wenchal's Avatar
wenchal wenchal is offline
Hangaround
 
Join Date: Oct 2011
Location: TX
Posts: 117
Default

I kept the heated seat from my previous bike (08 CVO Ultra). The element finally went out this past Oct. I wound up replacing it myself. Was a pretty easly job and the replacment was same brand as what Harley had on there and preforms just as well. Gets quite toasty!
Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Road Glide Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


 


All times are GMT -5. The time now is 01:13 PM.



Design By: Miner Skinz.com
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
H-D, Harley-Davidson, and Harley-Davidson Logos are registered trademarks of H-D Michigan, Inc. Harley-Davidson in no way endorses or is affiliated with this site.