Big $$$ for Outlawz

[BCRG]

Originally Posted by faststan

But that's Canadian time, right?

Yep, Eh'

[Bluefilhd]

The guys is a crook for charging that. I had never done bars at all yet alone internal wire a set. Took me about 5 hours to do my 12" Outlaws. Best tip I can give is be patient with the TBW connectors and you can get them easily. But even more important, LUBE, go to Home Depot or lowes and buy a bottle of "clear glide" and be liberal with it and your wires will go in fine. I'm an electrician so I used a steel fish-tape to pull the wires through but a wire coat hanger or a pull string will be just as good. You can do this and the forum can and will help if needed. Oh and stock cables are fine if you re-route the clutch cable.

[Mike U]

I did mine at home after removing them from my bike at my buddies garage.
It was a very tedious job. But it can be done without paying someone $1600-$1700 in hard earned ca$h.
My recommendations are 1. read Donk's sticky on how it's done, 2. purchase the cvo twist grip, it eliminated the dreaded green plug, 3. lots of wire lube, 4. a good snake or equivalent to pull the wires through some guys use weed whacker line and 4. lots of patience.
When the going gets tough step away to clear your mind.
Best of Luck!
Mike U.

[Fahred]

Originally Posted by Paul's Road Glide

12,000 miles. Ride it like I stole it and did it in 4 hours. You can tell that guy he is full of shit and has some sorry ass technicians.

I love RG. Org because of commentary like this.

[maddog69]

I have to agree with the group on this one I'da told him (stick it up his A**)
Buddy wanted some mini apes local shop said ten hours $1600 that's B.S.
Someone showed them how to do it most those monkeys can't read. I knew sweet fa about it got the book watched some youtube easy. Did mine in 5 hours buddy was envious he thought I paid some monkey $$$$ to put the bars on. Next week he got the bars I put them on in 4.5 hours for a flat of beer.

[ichiban]

My dealer told me if i go up to 12" I would need new wire harness. They make money on the ones who are not in the know. I told him I am a member of Road Glide Org forum and dozens of Road Glide bars were changed with stock cables. He said nothing....

[RoadGlide0611]

The guy's full of sh**t. I mean you watch the video's and step by step instructions and 5 hours or so your done. My buddy did his outlaws in 3 hours, but this is your first time, so it may be 5 hours.