New Ticking at 6100

[mitchdm]

So the Skunk sits in my garage ~ My life is back to normal The final Diagnosis after replacing the lifters was the Cam Drive Retention Bolt Sheered off ~ This is the bolt that hold the large sprocket when you are looking at your camplate. The Bolt was sheered at the lower end way up in the Camplate ~ so the remainder of it had to be drilled out ~ the bike is quiet again and runs great ~ took it about 80 miles to double check. Thanks for the support and ideas ~ once again I heard " We've never seen this before "... When the bolt was removed you could not tell it was missing the last 3/8 of an inch at a glance. The Tech had another tech come over to assist in finding the problem.