Road Glide banner

Cruise install?

2K views 4 replies 5 participants last post by  CNMTurner 
#1 ·
Anyone install cruise themselves?

Stealer wants 3 hours @ 80 pr hr to install.

Considering doing it myself when I have it apart this winter.
 
#3 · (Edited)
If you do the install of parts yourself, you may save a little. The kit just has Handlebar controls and dash switch.
No servo any more. But the Cruise will still need a Dealer Download to activate the Cruise in the ECM.
Most dealers charge a minimum half hour labor to do the download. So you will not save much.
Plus if they do the entire job and there is a problem, they will eat all labor for any repair.
If you install the parts, they will only cover the download. If there is any other problem, you will eat it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top