Road Glide banner

107 RC cycle tune

6K views 14 replies 7 participants last post by  HD2011RG 
#1 ·
Just had my bike tuned by Dyno Bob at RC cycles in Hayward Ca. He's the man. 115 hp and 122 tq. Want to post a picture but it keeps failing.


Sent from Motorcycle.com Free App
 
#4 · (Edited)
Motor specs; SE stroker flywheel welded and trued , timken bearing conversion ,ported big valve heads milled .010 with Crane 165# springs ,CP forged flat top pistons 10.5-1 comp. HPI ported 48mm throttle body with 5.3 gps injectors , S&S 570 cams , SE cam plate HV oil pump and hydro tensioners , S&S lifters , SE adjustable push rods , Barnett clutch with SE spring , baker primary adjuster , power commander 3. RC didn't build it only tuned.


Sent from Motorcycle.com Free App
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top