Road Glide banner

boy , i feel dumb

1K views 3 replies 2 participants last post by  08gezzer 
#1 ·
I dont know what i did , but i installed my PCV and the bike wouldn't start , 02 sensors where unhooked , had the key fob in my pocket , unhooked PCV and bike fired up , Not sure if i lost the program on the PCV or not I shouldnt have messed with trying to load a different map :eek:
 
#2 ·
pcv

If you had it connected correctly and the O2 caps on (they only fit one way) and it would not fire up I would say you probably messed up with the new map. Check the connector pins to be sure the are straight. If you use the "get" map it retrieves the map on the pcv. If you want to load a new map use the "open" to find the new map, click on it and then use the "send" function to send it to the pcv. Try again. Don't worry about the Pcv you can't screw it up - anything you do can be undone.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top