2011 FLTRU Road Glide Ultra - Road Glide Forums
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 10-23-2018, 12:06 AM Thread Starter
Join Date: Apr 2012
Location: Waconia, MN
Posts: 450
2011 FLTRU Road Glide Ultra

2011 HD Roadglide Ultra

Vivid Black, Very clean bike with 77k miles. I am the second owner, purchased the bike ~6 months old with 3k miles. A list of all the work done to the bike and when. I don't really need to sell it, and have no problem keeping it, just itching to start a new project...

Asking $12,500
Clean title, free and clear.
I am still riding, so the mileage may go up for a couple more weeks.

Nov 2012:
- Installed t-man 555c cam
- s&s adjustable pushrods
- S&S premium lifters
- timken bearing conversion
- dragos true dual head pipes
- Thundermax tuner and custom map (tuned by Dragos Bike Works in Illinois)

Sept 2014 (34,500 mi)
- Progressive Monotubes installed up front, standard height
- replaced fork seals

June 10 2015: (38,009 mi)
**Broke valve spring on front cylinder, minor piston damage, valve seat damage**
decided to do a S&S 106 kit upgrade:
- heads cleaned up, new valves and springs, etc installed by Lee's Speed Shop in Carver, MN (note: no head porting has ever been done)
-- Lee's Speed Shop
- Installed S&S 106 cylinders
- Wiseco flat top pistons
- New S&S premium limited travel lifters

July 2 2015: (39,107 mi)
(It was summertime in the midwest, gotta ride when you only get 5 months of descent weather)
- Balanced and welded crank done by PRO-PERFORMANCE INC. Elk River, MN
- New SE compensator (current model at the time, with oil deflectors)
- Baker Attitude Chain Adjuster
- New alto clutch pack ppk98+
- New bdl lockup bdp-500
-- Clutch is very smooth and never has slipped with this setup using full synthetic oil

June 17 2017 (61,143 mi)
- Replaced front and rear wheel bearings
- Replaced rear motor mount
- Clean/lube swingarm bearings

General Maintenance items:
- Oil, Primary, and Trans fluid always changed with Red-Line Big Twin 20-50 twice a year, at ~5k miles.
- spark plugs changed every spring
- Primary chain and clutch adjustments checked at every maintenance
- All general maintenance done as needed (pads, rotors, tires, fork oil, head bearing adj, etc)
- Current tires are Michelin Com II, Rear at 71,589 mi, Front at 76,032 mi

- Current mileage 77,800 (may go up as I'm still riding)

Cosmetic updates/changes:
- Painted inner fairing, engine heat deflectors, headlight bezel, instrument cluster to match vivid black
-- Removed lighter socket from fairing
-- Added usb and 1.8mm audio jack to inside left glove box
-- Added dual outlet port to inside right glove box
- Factory 47 Malo 14" Chrome 1.5 dia bars internally wired
- Polyurethane Handlebars Damper Bushings
- Magnum black pearl clutch and brake cables
- Arlen Ness grips (chrome flaking on throttle side)
- Willy G Skull collection floorboards, passenger boards, highway pegs, brake pad, shifter peg (no heal shifter, I have big feet)
- Upgraded shifter linkage with heim joints
- Alpine radio, Soundstream amp, Infinity kappa & Polk marine speakers installed
-- Alpine CDE-HD149BT
-- SoundStream PN.540D 4 channel
-- Infinity Kappa 62.11i in fairing
-- Polk Audio MM1 (Marine) Series 6.5inch
-- V-Twin Audio VTURCR (mount kit with splash guard for single din radio)
-- Biketronics BT1005X for handlebar control to work with radio
-- (Still have original radio if desired, has 1.8mm aux plug installed in rear by iron cross audio, no more cable hanging with the lighter mod to inside glove box)
- Painted gloss black Hawg Wired speaker grills (metal, not plastic)
- Harley Air wing tour pack rack
- Fairing lower quick flap magnetic doors
- Push button gas cap quick release
- Custom air horn installed into original horn cover
-- pump under left side cover by fuse panel, black air hose installed and hidden
- Saddlebag secure locking kit (replaces spring clips with secure bolt, never loose a bag again to a clip going bad or theft)

Bike is built for long term reliability, has lots of power/torq (110+tq/100+hp)
Engine fully capable to handle up to 117 kit if desired

Paint does have a few nicks from rocks over the years (will get pictures)
-- Front fender
-- Outer fairing
-- Right sadlebag, rear, lower right corner has small moon shape scratch
-- Tank has minimal wear in the normal spots
-- Saddle bad lids have minor surface marks, easily removed with a detail
-- Inner fairing has a paint run by temp/air guage (nobody has ever noticed it, but it is there)
- lower fork legs do have some pitting from sand/etc.
- When polished/waxed, the paint look flawless! (it's vivid black, keeping it flawless can be a struggle sometimes)
- Chrome exhaust shield has drug on the pavement. Can't see unless looking from the ground up. I do have pictures of this
- Bike has never been crashed, wrecked, or laid down
- Front rotors do pulse and are likely warped (seems I replace them with every set of pads), rear has no pulsing
Attached Images
File Type: jpg 20181008_202717.jpg (5.36 MB, 47 views)
File Type: jpg 20181008_202728.jpg (4.82 MB, 50 views)
File Type: jpg 20181008_202749.jpg (5.11 MB, 40 views)
File Type: jpg 20181008_203359.jpg (4.02 MB, 35 views)
File Type: jpg 20181008_202706.jpg (5.54 MB, 38 views)

2011 RGU Vivid Black <-- FOR SALE | T-Man 555c | T-Max | HD Heavy Breather | Dragos S/C/S True Duals | Rinehart 3.5" w/Turndowns
2016 RG Special Black Quartz | S&S 124 | yaddy yada...

Last edited by ksarauer; 10-23-2018 at 12:07 AM. Reason: Fixed url's
ksarauer is offline  
Sponsored Links
post #2 of 3 (permalink) Old 10-23-2018, 08:59 AM
JacktheBagger's Avatar
Join Date: Apr 2010
Location: Bama
Posts: 9,355
Nice , I C U have the custom eyeglass holder also >>>>>>>>>>

Thinking the 106 myself , how do you like it ??

So Many Highways So Little Time
2011 Ultra
JacktheBagger is offline  
post #3 of 3 (permalink) Old 10-23-2018, 09:46 AM Thread Starter
Join Date: Apr 2012
Location: Waconia, MN
Posts: 450
Originally Posted by JacktheBagger View Post
Nice , I C U have the custom eyeglass holder also >>>>>>>>>>
Yes, its a perfect spot for them without scratching up the lenses!

Originally Posted by JacktheBagger View Post
Thinking the 106 myself , how do you like it ??
I like it, I pulls hard where you want it, and has a bit thicker cylinder sidewall (vs 107) for handling the heat better. I was told that head work would really make a difference but I wanted reliability and longevity.

2011 RGU Vivid Black <-- FOR SALE | T-Man 555c | T-Max | HD Heavy Breather | Dragos S/C/S True Duals | Rinehart 3.5" w/Turndowns
2016 RG Special Black Quartz | S&S 124 | yaddy yada...
ksarauer is offline  

Quick Reply

Register Now

In order to be able to post messages on the Road Glide Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
2011 road glide ultra 103 FLTRU ichiban Bikes for Sale 6 10-17-2018 06:12 PM
2011 FLTRU Road Glide Ultra for sale fltru103 Bikes for Sale 5 09-06-2017 10:05 AM
2011 Harley Davidson Road Glide Ultra - FLTRU Lu Classifieds Archive (3 months old+) 1 12-15-2014 12:22 AM
2011 Harley Davidson Road Glide Ultra (FLTRU) yelnoc Classifieds Archive (3 months old+) 2 06-05-2012 06:50 AM
2011 FLTRU Road Glide Ultra electra31 Dyno Results 19 07-23-2011 08:23 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome