Sorry, I've been crazy busy with all this damn snow.
Yes , as others have stated, you do need to remove the outer fairing.
first, you remove the speaker grilles. pry gently from the inside of the fairing. I used a screwdriver with the end wrapped in a rag so I didn't scratch anything.
2 lower outside of the speaker hole is a screw on each side. remove them.
3 bottom rear where there are 2 screws from the inner to the outer fairing, remove just the lower screw on each side.
4 remove the hex bolt that you can see at the back of your turn signal bracket.
5 now, the only thing holding your outer fairing on is the 4 screws for your windshield. a second set of hands may be useful to hold the fairing on while you remove the screws. (I used my beer gut)
6 slide the outer fairing about an inch toward the front of the bike and hold it there.
7 grab the top vent assembly and gently pull toward the front and up, it will pop out pretty easily.
8 now you can unplug your front turn signals and remove the outer fairing.
the vent screens fit in the opening and get sandwiched between the inner and outer fairing and the trim piece that is on each side of the headlight assembly. once you get the screens in, you reverse the process and put it all back together.
The whole process should take about 30-45 minutes with a beer break.
Never marry an ugly woman, it just takes the energy right out of you.