There are many cam options that would work for you. I would suggest doing some research on cams, there are many web sites that have dyno sheets on different cams in different builds, Fuel Moto has a good dyno sheet section on Woods cams and you should check that out. I used a Woods TW222 and it was a great low/mid range torque cam, You can also consider a Woods TW555 or a Tman Troquester555. By checking the dyno sheets you can see where the torque curve starts and stops and then you can look up the cam specs. I look for cams that produce 100 ft lbs of torque around 2200 and 2500 rpm and it won't drop below 100 ft lbs of torque until 5000 to 5500 rpm.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
08 FLTR candy red sunglo,with 2015 103 HO, V&H Dresser Duals with Monster Rounds, Power Vision tuner, Willy Shiny Wheels and Forks and a bunch of other stuff.