Hey guys I got a 13 cvo road glide, just sent away the HK for some pre outs to add the 4ch jl audio amp I have from the SG. I have lowers on the bike so I'm adding the 6.5" lower faring speakers, also going to change the faring ones to 6.5". Now in the bags as I've read I have to keep same size 5x7? I believe.
My question is without running new wires for the saddle bag speakers do you know which ones come to the HU so I can cut and splice them to go into the amp. With it being a 4ch amp I'm going to have to bridge the speakers would it be best to bridge the four 6.5" in the faring? I'm not sure on what speakers I'm putting in yet gotta go see my audio guy to see what deals I can get.
It's probably pretty easy to see the wires once you get the outer fairing off. Just match up the colors coming from the speaker. It's all aftermarket, so it should stand out from the oem stuff.
Are you talking about running speakers in series or parallel? If running in series or parallel, you must be ohm conscience . Bridging is running two of the amps channels into 1 speaker. Your always better off adding an extra amp rather than running in series or parallel .IMO
2010 FLTRX , Stage 1, 13" Madstad, Mono tubes, SuperShox, Heritage style bars. Alpine CDE-HD149BT,Soundstream Picasso Nano Series PN4.520 , 5X7 and 6.5 Infinity Kappa speakers
If I have to explain ,you wouldn't under stand anyway.