Join Date: Jan 2011
Location: Calgary Alberta Canada
16.75 inches across the front, where the inner pocket is located
13.75 inches across the back, where the antenna mount is, rounded corners but essentially they shave 1 inch off of each end. The taper start about 6 inches down from the front toward the back.
13 inches from front to back, from the edge on the pocket side to the edge on the antenna mount side
This is in a 2008 tourpak for a roadglide direct from HD.
You should be able to cut the plate then tape it in the bottom of the tourpak with duct tape and mark the holes that will need to be drilled. There are 6 studs that are part of the plate then the mounting holes for the tourpak rack be it fixed or removalbe.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
2019 FLTRU, Tyggr
2016 FLTRU, Ruby, moved on to a new owner
2012 Road King Police, rain bike/teaching aid/will only go in circles
2011 Suzuki WeeStrom, Great Pumpkin, gravel rider.
2008 FLTRI, Miss Louise, moved on to greener pastures