Join Date: Sep 2009
I have an ebay Razor box mounted on my 07.
Mounted mine on a detachable tubular luggage rack I had bought but wasnt using.
Cut a raised tube off it to make it flat, aligned the pac where I wanted, located and drilled 4 holes with a cordless, mounted it with the slotted straps and 4 stainless bolts. I fit a pc of 1/4 "birch plywood inside the pac and bolted thru it also. The fiberglass mat inside is tough on jackets and stuff, pretty abrasive. Looking to maybe put some felt or outdoor carpet in it this winter
I find the quality is off, but I realize you get what you pay for. After buying the pac,Harley HD hinges and latches, getting a matched keylock, getting the cables, buying 75 bucks of paint, drilling holes ( no small feat without a pattern, and the hinge pads are not molded very good, the lock hole is particularly tough, gotta hit it right on the first try) painting the thing seven times, then finding the lid wont shut with the Harley seal is somewhat disappointing. I made it work, but probably have 400+ in it plus my time.
And I had the detach mount already. If I did it again, I would try for a Harley one off ebay or craigslist, get an ABS one. It's not worth the 800 HD wants for them new to me, but the bargain one is pretty much just that.
I also fit my Matuzu back rest pad on it. Hate it, but functional. Looking for a Harley one. Another 120-150ish
I reject your reality, and replace it with my own..
Last edited by mike; 02-07-2015 at 09:11 AM.