Road Glide banner

1 - 13 of 13 Posts

·
EFI tuning and Exhaust Expert
Joined
·
815 Posts
Discussion Starter #1
installed Wood TW-777 cams in a 2015 Road Glide yesterday

From our Facebook news feeds https://www.facebook.com/FuelMoto

+23Hp/15Tq; Fred S. brought us is stock 2015 Road Glide and we installed Wood TW-777 cams, RSD air cleaner, D&D Fatcat 2/1 exhaust, and dyno tuned it with Dynojet Power Vision



 

·
Registered
Joined
·
2,305 Posts
Interesting. Where's that low end TQ dip I always see with a Fat Cat (and most 2-1)?

Maybe its only a matter of the skill of the tuner, then! Hmmmm....
 

·
Registered
Joined
·
2,610 Posts
Just seen the spec sheet on the 222 with the same setup. Q it made more torque.
 

·
Registered
Joined
·
7,287 Posts
Torque,.. I also see that Frank's new cam shows good numbers too. Some many choices.

Thanks for sharing the info Fuelmoto.
 

·
Registered
Joined
·
4,838 Posts
777 probably would have looked even better with a little compression bump
 

·
Registered
Joined
·
103 Posts
Baffle is louvered wrapped, Jamie will have to answer cam ? but pretty sure Itz straight up

next step is bump compression, one step at a time. thats y I did the 777, so i only need to change cam once. I'm pretty happy with set up, now if the salt and snow would leave, and I could twist the wrist on this thing.

Thanks alot Jamie and the crew at Fuel Moto
 

Attachments

1 - 13 of 13 Posts
Top