Road Glide banner

1 - 13 of 13 Posts

·
Registered
Joined
·
999 Posts
Cut it down!

Any interested parties could always buy this and cut it down to size.

Tape it off.
Mark where you wanna cut it.
Cut with a jig saw on a low speed setting so as to not melt what you are trying to cut.
Clean up the cut with a belt sander. Also on a low speed setting.
Remove the remaining tape.
Clean.
Mount.
Enjoy!

Good luck!

HSP
 

·
Registered
Joined
·
553 Posts
Discussion Starter #12
Any interested parties could always buy this and cut it down to size.

Tape it off.
Mark where you wanna cut it.
Cut with a jig saw on a low speed setting so as to not melt what you are trying to cut.
Clean up the cut with a belt sander. Also on a low speed setting.
Remove the remaining tape.
Clean.
Mount.
Enjoy!

Good luck!

HSP
Thanks , i didnt think of that


Sent from Motorcycle.com App
 
1 - 13 of 13 Posts
Top