Road Glide banner

2010 Head light conversion

2410 Views 4 Replies 5 Participants Last post by  CCRydah
Anyone know what it takes to change the headlight mounting plate over to the 2010 style. I stopped by the dealer but their general response is that you have to buy the entire assembly (lens, bulbs, hardware, etc.). I was hoping I could just change the hardware and backing plate.

It would be nice to be able to adjust the headlights and/or replace one on the road without having to remove the fairing. Not sure what the MOCO was thinking before 2010.
1 - 1 of 5 Posts
someone on here has done it...I was searching through threads about "lowers" and someone had posted that they had done the headlight conversion along with the 2010 fairing mounts so he could run the vented lowers. part #'s and everything. I should have book-marked it!
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.