Joined
·
853 Posts
Hi guys, I recently bought the King Tourpak with the run/brake/turn light. I didn't get a drilling template for the light, so I have to make one....no problem except that with the boss coming out of the front of the light into the Tourpak I can't get an accurate starting point to make my alignments.
Can any of y'all give me the measurement from the top rim of your pak to the top of the light at the center in back and the front of the sides? I'm going to make a paper template for it and I need alignment/height measurements.
I would greatly appreciate it!
Thanks in advance!
Can any of y'all give me the measurement from the top rim of your pak to the top of the light at the center in back and the front of the sides? I'm going to make a paper template for it and I need alignment/height measurements.
I would greatly appreciate it!
Thanks in advance!