Road Glide banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!
1 - 2 of 2 Posts

·
Premium Member
Joined
·
5,850 Posts
Thanks for the heads up! I'll definitely check it out. My only concern is how to go about replacing it (unfortunately I'm about as mechanically inclined as a cup of tapioca pudding.)
don't think that you'll be able to save the old one, you won't. use a plastic spudger to get up under a corner, a hair dryer to warm it up and soften the glue and just work it up. after it comes off, the hardest part is getting all the old glue residue off. then it's just a matter of peeling and sticking the new one. test fit it about 3 times before you do, then test fit it again....

i like to pull a little of the backing paper off, slightly to the side, then when you stick it down, you can just pull the paper off from behind, sticking it down as you go.

or you can just put a sticker over it, lol. you damaged it once, odds are you'll do it again. if you find after a time that you don't, then you can replace it.
 
1 - 2 of 2 Posts
Top