I got the right bulb too. And the lights are not LED.

 

Check your socket and wiring.
Also maybe coat the bulb base with some dielectric grease to make sure your getting good contact.

 

All that looks fine. Also why they make it such a PITA to remove the battery? Lookalike I gotta take the whole damn rear shock out. It was working fine all weekend then started it up Monday and it don’t work. Stupid shit like this pisses me off more than something majorly mechanical.

the old one didn’t even look blown which also worries me.

 

Right blinker just flashes like crazy and rear one don't work.

That would be the correct behavior under stated circumstances.

B2156​

Right Rear Turn Signal Output Open

Purple is Left TS
Brown is Right TS

Gotta be a broke/loose brown wire on the way to the rear TS. Try eliminating where it isn't by checking for output on the brown wire in the rear fender plug.
If it's there, issue is in the fender.
If it's not there, issue is in the harness going forward.

 

Did you by chance put the bulb in correctly? I’ve come across numerous people who are not aware that dual filament bulbs are keyed with different depth posts on them where they’re only supposed to go in one way. If you call upon your inner gorilla you can end up forcing it in the wrong way without knowing it

 

That would be the correct behavior under stated circumstances.

B2156​

Right Rear Turn Signal Output Open

Purple is Left TS
Brown is Right TS

Gotta be a broke/loose brown wire on the way to the rear TS. Try eliminating where it isn't by checking for output on the brown wire in the rear fender plug.
If it's there, issue is in the fender.
If it's not there, issue is in the harness going forward.

If that involves taking the fender off or removing parts that don't simply pop off....F that shit. I'll take it in.

Did you by chance put the bulb in correctly? I’ve come across numerous people who are not aware that dual filament bulbs are keyed with different depth posts on them where they’re only supposed to go in one way. If you call upon your inner gorilla you can end up forcing it in the wrong way without knowing it

It's a single filament so it goes in pretty easy.

 

If that involves taking the fender off or removing parts that don't simply pop off....F that shit. I'll take it in.



It's a single filament so it goes in pretty easy.

🤣🤣🤣🤣I wish I had F that shit money.

 

Oh that’s right I forgot there’s an actual dedicated brake lamp on the ST

 

I just ain’t got anywhere great to dive in to it. Plus it’s still hot AF outside. And seems like when I start wrenching on bikes things break. So F that shit.