I have a "solo" ride 22 CVO envious green that I wanted to wake up a bit, my "faster than a speeding ticket" days are pretty much over..or at least far and few between now. But I do like a little bit better than stock when the wife stays home & get to take our the mistress! I get to push it with no fear of a fist to the back the head! After a little bit of back n forth on cam, which there are a lot to choose from, I was turned on to Cycle Rama from my local builder/mechanic. I was originally between the star 30/30(hugely), S&S475 and the zippers rs468. He was fine with any of them, he was familiar with the typical results of each..all in the same neighborhood, but favored the only company not on my radar due to a recent build with a CR 483. So as I dug into cycle rama I found this 480MT (monster torque). On a total bare bones budget build. It tuned out to 121 hp and 151 tq. Torque comes on fast and hard, and Horses pull up steadily. Very impressed.
What was done: TAB BAM STICKS ZOMBIE BAF's, TAB 2-1-2 (to use stock heat shield)CR-480MT, S&S lifters, tensioner, quickee pushrods, fueling sprocket + bearing and gasket kit. Cheap-O RSD knock off air cleaner from a friend's recommendation $75.00 eBay!
What was left in: Stock cam chest, stock lifter cuffs, stock intake, stock injectors.
What was done: TAB BAM STICKS ZOMBIE BAF's, TAB 2-1-2 (to use stock heat shield)CR-480MT, S&S lifters, tensioner, quickee pushrods, fueling sprocket + bearing and gasket kit. Cheap-O RSD knock off air cleaner from a friend's recommendation $75.00 eBay!
What was left in: Stock cam chest, stock lifter cuffs, stock intake, stock injectors.
