I bought one of the Harley Center Display stands. It was a PITA but after I put in on and off several times, I figured out how to install it, it was easier.
First, I screwed the bolts into the Bolt plate to remove the Locking material from the bolt.
Second I mounted the rear two bolts in place loosely to hold the stand up.
Third I took a straw and moved the single bolt plate in place, with the lip in the hole. I used the straw to hold it in place while I took the third bolt to install. I used some red locktite on the bolt and started the bolt in the bolt plate.
I tightened the bolt and held it as I tightened it to specifications.
Fourth I removed the rear bolts one at a time. I applied Locktite to these bolts and tightened them also.
This is how I mounted the Center Stand.
First, I screwed the bolts into the Bolt plate to remove the Locking material from the bolt.
Second I mounted the rear two bolts in place loosely to hold the stand up.
Third I took a straw and moved the single bolt plate in place, with the lip in the hole. I used the straw to hold it in place while I took the third bolt to install. I used some red locktite on the bolt and started the bolt in the bolt plate.
I tightened the bolt and held it as I tightened it to specifications.
Fourth I removed the rear bolts one at a time. I applied Locktite to these bolts and tightened them also.
This is how I mounted the Center Stand.
