Road Glide banner

Derby Cover specs

3415 Views 6 Replies 7 Participants Last post by  skratch
I need the site knowledge for this one; I bought a dark custom derby and cone cover today. I went to put the derby on and realized the derby cover bolts are torqued to 100lbs? the snap-on T27 I used about broke. Does this need to be so tight? I F-ed the bit up and the bolts are trashed. Before I torque the new bolts I bought , do I need to be so tight?
1 - 1 of 7 Posts
after you get the bolts out, before putting them back in (whether new or same) put a dab of anti-seize on the threads. this will save you problems in the future.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.