[rustyj671]

I just changed cams from the SE-255 and all I can is HOLY CRAP! I should've done this instead of wasting time with the 255s. Here's the run down:

Arlen Ness A/C
Dragos 580 cams
Crane lifters
Fuel Moto pushrods
Dragos Dragula 2 into 1 w/ 2.55 baffle
580 tune from a member here for my PowerVision

Pulls hard all the way to the limiter as opposed to the 255 that shut off too early for me. With the new SE compensator and GMR compensaver and washer, it is now very quiet when just tooling around.

Maybe one of these days I can find a tuner around NW Louisiana that I'd feel comfortable with.

 

[Triplej]

Glad to hear you are happy with the new set up. As for tuners you are only a short drive to DFW and you would be well served by either Ed at the Dyno Difference or Steve at GMR Performance for your dyno needs.

http://www.thedynodifference.com/

http://gmrperformance.com/

 

[MyGlide]

Can't go wrong with Ed. Have used him several times with different builds, that's the only place I'll go.

 

[DragoBikeWorks]

Ed will hook you right up. He has tuned many of our combos.
Enjoy your new found power!!!!