[firedude]

Noticed a few weeks ago that the forward left bushing on my four point system is gone. Bushing, spacer, bolt, everything. Only thing left is the rod that goes through on the inside where you put the bushing on.

Anyone know where I can get replacement hardware? I've looked and all I can find is the whole hardware kit. Mounting plates and everything. If anyone could point me in the right direction it would be much appreciated.

Sent from my SM-N910V using Tapatalk

 

[calgaryglide]

Need a little extra info here.

What year is your bike? It would help if you added that to your sig.

On the 2008 down model years, here is a pdf showing the parts, scroll to pages 3 and 4.

http://www.harley-davidson.com/app-content/service/isheets/-J03704.PDF

It looks like the bushings can be ordered separately.

On 2009 up models to 2013 for sure here is the a pdf showing the parts.

http://www.harley-davidson.com/app-content/service/isheets/-J05396.PDF

Same here, looks like the bushings can be ordered separately.



Regards,


Calgaryglide

 

[cobra206]

You can always ask you local dealer for the individual pieces. I had to order a few parts as apposed to ordering the entire kit... My dealer did it, no problem...

 

[firedude]

I have a 2015 RGS. Yea I figured the dealer could probably order parts but I wanted to see if there was a quick and easy aftermarket option.

Sent from my SM-N910V using Tapatalk

 

[93-331-29psi]

Aftermarket bushings were run about $50 a pair when I used to have them made. They're nice however they don't have any give like the stockers do and tend to cause stress on tourpaks.

 

[firedude]

Ordered the parts from the dealer.

Sent from my SM-N910V using Tapatalk

 

[Woodman]

Well Firedude you got it handled but FYI next time AMS makes stainless bushings
Parts for Harley Davidson

 

[firedude]

Thanks for the info. Will keep in mind for the future

Sent from my SM-N910V using Tapatalk