Road Glide banner

Front brake line question

2852 Views 12 Replies 5 Participants Last post by  DanHappy
I am doing my bars and I think I might be losing my mind or correct and I need help on a ruling.

I am putto g on 14" apes on my 13 RGC. With ABS. When I ordered the replacement front brake line, it came as a short 22" cable. I looked in the manual and it shows a line all the way back to the ABS module behind the bag on the right. If that I'd true, then the line is over 60" long. Or is there a block or hookup somewhere that I am missing? I did a search on a few sites and they all show the short cable. Any help?
1 - 1 of 13 Posts
Any way to change the one without pulling off the tank? I am thinking no. I have a full tank and going to be heavy.

TripleJ's right. That brake line runs through some tabs on the side of the wire tunnel, under the tank.

A full tank's not tremendously heavy maybe 40-45lbs. It's manageable. If it bugs you, you can always siphon some out.

Trust me, I wouldn't steer you wrong. :)
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.