Road Glide banner

Front shock help

1173 Views 7 Replies 6 Participants Last post by  z2thdr
I'm having my fork lowers powder coated. So I took it all apart. I have 15k miles on the bike. My question is do I need to replace the fork seals and all the o rings per the service manual or is that written for the 50k service.

I know the 6mm bolts and crush washers have to be replaced. And I'm also gonna replace the quad ring seal.

1 - 1 of 8 Posts
Add Mono tubes and use old seals. :)
  • Like
Reactions: 1
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.