Front shock help

1175 Views 7 Replies 6 Participants Last post by z2thdr, Feb 7, 2016

Jwams

Discussion Starter · Feb 6, 2016

I'm having my fork lowers powder coated. So I took it all apart. I have 15k miles on the bike. My question is do I need to replace the fork seals and all the o rings per the service manual or is that written for the 50k service.

I know the 6mm bolts and crush washers have to be replaced. And I'm also gonna replace the quad ring seal.

Thanks

Save

1 - 1 of 8 Posts

z2thdr

· #8 · Feb 7, 2016

Progressives front and rear

Several of my friends at Rose City Hog and myself have gone to Progressive monotubes in the forks and Progressive 444s for the rear shocks. Much improved ride, minimal fork diving, and do not get the spinal shock when hitting a bump.

Save

Reactions: 2

1 - 1 of 8 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Home
Forums
Road Glide Forums
Suspensions
Front shock help

Top Contributors this Month