Road Glide banner

Front shock help

1173 Views 7 Replies 6 Participants Last post by  z2thdr
I'm having my fork lowers powder coated. So I took it all apart. I have 15k miles on the bike. My question is do I need to replace the fork seals and all the o rings per the service manual or is that written for the 50k service.

I know the 6mm bolts and crush washers have to be replaced. And I'm also gonna replace the quad ring seal.

1 - 2 of 8 Posts
I would replace them. Less chance of failure.
Forgot to mention since you replaced the seals at 15,000 you can go to 65,000 before replacing again.
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.