Road Glide banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2021 HERE!
1 - 4 of 4 Posts

·
Registered
Joined
·
329 Posts
Discussion Starter · #1 · (Edited)
Does anyone know the stock handlebar dimensions of the 2015 RGS?...specifically its height? I want to swap my stock handlebar one day for something with more style, but don't want to go much higher than the stock height...+1"or maybe 2" would be okay. I know some owners/riders/magazine reviewers have expressed less-than-favorable comments about the stock handlebar's pullback and shape, but it's angles and comfort make complete sense to me especially since my bike is equipped with a C&C solo seat that's sits me further rearward a little over an inch. I'm looking at the Factory47 10" or 12" Malo or Assault and hope to keep the swap simple by using existing wires/brake line/clutch line/etc. The F47's 1.50" dia should make this an easier DYI project when pulling wires through yes?
 

·
Registered
Joined
·
329 Posts
Discussion Starter · #2 ·
I just spoke to F47. Based on my present satisfaction of the stock bar's ergos behind my C&C solo seat, they suggested their 10" Malo....which will not require wire/line extensions. KOOL!
 

·
Registered
Joined
·
7,835 Posts
Does anyone know the stock handlebar dimensions of the 2015 RGS?...specifically its height? I want to swap my stock handlebar one day for something with more style, but don't want to go much higher than the stock height...+1"or maybe 2" would be okay. I know some owners/riders/magazine reviewers have expressed less-than-favorable comments about the stock handlebar's pullback and shape, but it's angles and comfort make complete sense to me especially since my bike is equipped with a C&C solo seat that's sits me further rearward a little over an inch. I'm looking at the Factory47 10" or 12" Malo or Assault and hope to keep the swap simple by using existing wires/brake line/clutch line/etc. The F47's 1.50" dia should make this an easier DYI project when pulling wires through yes?
Per the 2015 book it shows:
Dia: 1.25
With: 32.25
Pull Back: 10.50
Rise: 9.50
Base With: 12.50
Knurl Width: 3.14

Hope this is what you are looking for.
 

·
Registered
Joined
·
329 Posts
Discussion Starter · #4 ·
Yes...thank you very much!
 
1 - 4 of 4 Posts
Top