Road Glide banner
1 - 20 of 29 Posts

· Premium Member
Joined
·
4,285 Posts
I just installed the HD trim and am not real happy with it. Gaps on the bottom of the trim. I'm not sure if it is because of my windshield or what. I may have to have HD install. I did self install. See photo

 

· Registered
Joined
·
28 Posts
I have the HD trim and if I ever take it off again it stays off !!! 6 times due to windshield changes and it's still a PITA. It might help if all the bolts had offset holes and not just two of them. Mine fits fine it was just not worth the effort.

Tom
 

· Registered
Joined
·
992 Posts
Wow... and I thought it was only me that struggled with the HD Trim install. I just recently bought it and installed it last weekend, wasn't nearly as easy as it looked. :confused:
 

· Registered
Joined
·
157 Posts
I just changed my shield and have taken the trim on and off 4 times...I seem to be confused with the offset screws. I'd appreciate any help. Thanks.
 
G

·
They go in the outside (rear) holes and screw into the rubber farring nuts.They are offset for alignment puropses. Just take your time. If you push too hard they will go into the inside of the farring and then you will have to take the faring off to get them back out.
 

· Registered
Joined
·
44 Posts
Kury trim vs. HD trim

I have the HD trim - love the look but taking it on/off is a PITA! My cousin has the Kury trim & it seems to pop on/off with no problem - seems a little unproportional to the fairing tho' (little too narow)...Q
 
1 - 20 of 29 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top