Road Glide banner

1 - 2 of 2 Posts

·
Registered
Joined
·
203 Posts
Discussion Starter #1
i'm going to take the rockers off soon to install rockouts and was going to inspect the health of the lifters while i am in there. the lifters are dragos in-house lifters and have about 7k on the clock. i don't suspect anything is wrong, just figured while i am there i could look them over.

what do you look for when inspecting lifter health?
 

·
Registered
Joined
·
2,931 Posts
Well, look for wear marks on the rollers and on the cams. On the lifters also look at the sides for wear marks. I don't know anything about their lifters or who makes them. S&S standard lifters are about $100 and are great lifters. Good luck. I just changed out my 16 RGS lifters with 5000 miles on them because they had been rattling at start up fro up to 2 or 3 minutes. There has been a problem with the C lifters from Harley. S&S standards went in and is quiet as a mouse now.
 
1 - 2 of 2 Posts
Top