Road Glide banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!
1 - 1 of 1 Posts

· Registered
Joined
·
6,648 Posts
Well one of my HD "B" lifters finally went out, the bearings on the roller on the rear cylinder intake lifter was the problem.
Replaced all 4 of the lifters with Melling JB-2079 lifters from Autozone at a cost of $47 for all 4 lifters.
As mentioned before there is NO difference between the HD lifters and the Chevy lifters and the bike runs just fine with the new Melling lifters.
If there's no difference, I hope the new ones last as long or longer.:D

How many miles were on the stock ones?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top