Road Glide banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!

1 - 4 of 4 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter #1
In the middle of installing KST bars and the throttle side has a black connector that I can’t for the life of me find the other. I assume it’s a spare for heated grips? There was a spare black behind the dash but they don’t match up. Thanks.



Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
411 Posts
Not missing in loom, it’s two wires; depin them and pull them through; used for heated grips; if you had heated grips this is where both sides connect together. The actual power feed to the grips is off the twist grip sensor.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
19 Posts
Discussion Starter #4
Not missing in loom, it’s two wires; depin them and pull them through; used for heated grips; if you had heated grips this is where both sides connect together. The actual power feed to the grips is off the twist grip sensor.


Sent from my iPhone using Tapatalk
Thanks. I didn’t take a before picture and couldn’t remember if it was connected.


Sent from my iPhone using Tapatalk
 
1 - 4 of 4 Posts
Top