Road Glide banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2021 HERE!
1 - 3 of 3 Posts

·
Registered
Joined
·
253 Posts
Discussion Starter · #1 ·
So I installed a focal amp and speakers, I have not flashed anything yet. After putting it all together yesterday I have no hand controls or guages at all. It worked as I put stuff together but now after almost complete reassembly, I have nothing. The weird part is, it went in stages. Not all at once.

The left side controls went first, then the guages and today, the right side went. All fuses are fine , connections checked, checked and checked again.

Help?:confused:
 

·
Registered
Joined
·
35 Posts
bars

double check it.I found on my 2015 the can-bus wire was broken ,that will shut it all down.the can-bus on mine are white/blk tracer and red/blk tracer twisted together. the crimp on at the end of the wire was busted inside the white 4 wire connection under the speedo area.I used an ohm meter at each end of the wire
 

·
Registered
Joined
·
572 Posts
Glad you found it! Electrical can be a nightmare trying to find sometimes!!
 
1 - 3 of 3 Posts
Top