Road Glide banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6,675 Posts
Discussion Starter #1
Looking to put on a TB and injectors it looks like a simple job as long as I follow the instructions in the service manual. What I see is that I need a special tool from HD which is the intake manifold wrench, can I get away with another tool to do this job or do I have to purchase this specialty tool, are there any other tools needed to do this change?
 

·
Registered
Joined
·
346 Posts
I took a standard allen wrench and cut the short leg down to about 1/2 in.
long. that works on one side. The other side I used an allen socket.
Worked for me.
 

·
Registered
Joined
·
862 Posts
Yes, yes I'm necro-threading - shoot me.

I stumbled across this thread looking for something else, and couldn't resist adding the Yost Intake Manifold Wrench with Ball End: WRNB $12.00

I've had mine for almost 30 years and they are - by far - the hands down handiest thing you will ever find for doing the intake manifold bolts.
 
  • Like
Reactions: RGKen
1 - 3 of 3 Posts
Top