Road Glide banner

1 - 7 of 7 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
Hi Guys and Girls,

I've put my 2010 RG back together after the build and I have NOTHING for electrical. I've checked all the typical suspects like fuses etc and all looks good. Battery is good and strong (the old one froze in the garage over the winter (yes it got cold up here)
I have no power anywhere, no gauges, headlight, stereo, horn etc.

When I rebuilt the only thing I didn't do is attach the ground wire to the top of the tree (like stock) because I put Pickard Raked tree on. I went directly to the handle bar mount. (pic of stock)

Any help would be appreciated - Electrical is not my strong suit.
 

Attachments

·
Registered
Joined
·
875 Posts
That's a rubber bushing under washer! Potentially that could be the issue.
I would rather go to where the tank mounts to frame. Might be better off.
Sounds like you don't have ground/-


Sent from Motorcycle.com Free App
 

·
Registered
Joined
·
875 Posts
Your connected to ground at Fran in picture. Might be a dead battery from retailer!
I've had it happen with my chopper
Battery died bought another and that was dead


Sent from Motorcycle.com Free App
 

·
Registered
Joined
·
2,423 Posts
Check for power at the battery with a multimeter, if okay check all your fuses.
 

·
Registered
Joined
·
20 Posts
Discussion Starter #7
Main fuse. Got power at both ends! Is your ignition switch installed and working properly.
I will check but the fuse looks good. I was wondering about my ignition switch. It was a bitch to re-install but seems to be working fine now. How do i check it?
 
1 - 7 of 7 Posts
Top