Road Glide banner
1 - 12 of 12 Posts

· Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Hello
I have a 2015 rgs. I just recently ordered a power vision decatted headpipe air kit with 4"megaphone style mufflers. Would I be better of finding and using a map preloaded or is there a custom map I should use that is floating around the interweb somewhere
 

· Premium Member
Joined
·
8,184 Posts
Find a map that is close in the canned maps. You do not have to match the pipes prefect regardless of what some tell you there is not that much difference in pipes they fall into groups rather than some special tune for each set.. Your basic Power vision has auto tune.
First back up your factory tune copy it to your computer save it in a safe place.
Load the canned map that is close to what you have. Then start running auto tune save that run then run a few more on the same map.
 

· Premium Member
Joined
·
6,483 Posts
I was asking a qustion if there was a custom map out there or if I was better off using the dynojet map. I don't think contacting dynojet will help me but thanks for replying
and the reply to contact dynojet was spot on. many of the maps that dynojet uses have been developed with the assistance of fuelmoto. if you call them, they can assist you in what map to use, and they might even have you send in your map, and some diagnostics/logs and help you from there.
 

· Registered
Joined
·
255 Posts
I have a 15 RGS with decatted head pipe and 4" RCX mufflers and FuelMoto breather. I have the Powervision and Target tune. I have some pre Target Tune tunes if you would like to try one. I have some that are leaner for riding in the NC mountains and some that are just setup for Stage 1. Let me know and I will try to help. Email me [email protected]
Nick
 

· Registered
Joined
·
2,790 Posts
No it's the Dynojet Autotune Pro for the Power Commander and the Power Vision. The Target Tuneis a different unit they just came out with that I believe only works with the Power Vision.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top