Road Glide banner

Primary fluid leaking at derby cover

8529 Views 10 Replies 7 Participants Last post by  rlaf75
Got home from Shark Week V, 3000 miles on fluid change. No evidence of a leak through the whole trip. Bike was washed and parked for the last two days while I was working, got home this afternoon to this....

It appears to be leaking from the derby cover, using a paper gasket (new style rubber doesn't fit this derby cover).

Question... Going to replace the gasket and retorque the screws but is there anything else I need to pay attention to? Should I drain the primary and replace the fluid again with the correct amount?
See less See more
1 - 1 of 11 Posts
if you don;t like the torex
screws, go to ACE hardware, they have chrome allen head screws, be sure you measure the length of you torex ones in order to get the correct length
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.