Road Glide banner

1 - 4 of 4 Posts

·
Registered
Joined
·
63 Posts
Discussion Starter #1
Hey guys, hope this helps as the other posts sure helped me on deciding what to do. After a lot of research, I went with the Monotubes up front (duh) and decided on the 944's for the rear. Best prices I found were on Direct Cycle Parts, they were within a few bucks of even the ebay sellers.
Went with the Heavy Duty 944's, as I weigh 210 and my wife is thick too...
The 944's lower one inch, and I will set the Monotubes to do the same??
What are the thoughts out there on that, bike is a 2013 FLTRU.
 

·
Registered
Joined
·
137 Posts
I was thinking of going the same route so I am interested to see who has this set up and how they like it.
 

·
Registered
Joined
·
1,361 Posts
I have a 12 FLTRX and went -2 up front Monotubes with 944 standard height as they say they ride 1" lower when seated.

Love the look and the ride. Stock wheels for now
 

·
Registered
Joined
·
723 Posts
I have this set up but I dropped the front by 2 inches and had the lighter springs put on the rear as my wife and I are a bit lighter.

Rides like a dream. Mine is the older frame with the progressive engine stabilizer also installed. That made a big difference too.
 
1 - 4 of 4 Posts
Top