Road Glide banner

Quick Release TourPak

1K views 3 replies 4 participants last post by  DuraGlide 
#1 ·
Hey guys - I have a 2015 RGS - added the tourpak - which, I'm assuming is from an Ultra. It says it's "quick-release" which, in my opinion is not true. I finally got it unhooked, and off, but now when I try to put it back on, the little C clamps on the rear will not engage, they act like they're stuck - has anybody come up with a trick to get these reconnected, or is it simply a matter of overcoming it with brut force? Thanks!
 
#2 ·
I don't have a tourpak, but I do have a 4 point on my '13. Everything was real tight the first few times I connected. After that it was still snug, but is much easier. I used brute force, but be careful that the C clips are connecting right if you choose to go that route. Hate to see them break.
 
#3 ·
Try putting a little lube on the plastic C clips. Look on the bright side, it won't be easy to steal.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top