Road Glide banner

ROAD 6 CUSTOMS bars installed

14820 Views 16 Replies 11 Participants Last post by  StrokerAce
I picked up a set of the ROAD 6 CUSTOMS RoadGlide bars from ebay. The bars seem to be good quality, fit well and fairly easy to install. Shipping was fast. I have never installed bars before and didn't do any research prior. It took me about 3 hours start to finish. Had I looked into it more, I could have shaved about 30 minutes off.

I find them to be a lot wider and a bit taller than stock and they do come back a bit. Not a whole lot in my opinion but they feel great for me. I'll probably tilt them back a little further in the future. I am 6'4" tall. On to the pics......

See less See more
1 - 1 of 17 Posts
The bars are supplied with plastic caps which I didn't like. I really wanted spikes so here is what I came up with. Just an automotive soft plug and a spike from ebay.

I still need to either powder coat the washer or just pick up some chrome washers.

Very creative. I can see others expanding on this idea.
1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.