Road Glide banner

1 - 3 of 3 Posts

·
Registered
Joined
·
99 Posts
Discussion Starter #1
I have a set of rocker box covers, lifter blocks, and cam cover off my 06' Electraglide that I want to powdercoat black and put on my 2010 FLTRX. Just wanted to make sure they will interchange, I know they will bolt on but more worried about clearance issues on rocker box covers. Also doing 103, Andrews 54H, Dragula, mild porting, .030 headgaskets.
Thanks for any advice
Andy
 

·
Registered
Joined
·
8,225 Posts
Rocker boxes are the same from 99 till now, so they will work. Not sure about the rest.
 

·
Registered
Joined
·
99 Posts
Discussion Starter #3
Thats what I figured. I know some of the later castings had more clearance for valve springs but just wanted to confirm.
 
1 - 3 of 3 Posts
Top