Road Glide banner

Rockford Fosgate PBR 300x4/Speaker install

1528 Views 7 Replies 6 Participants Last post by  Waikikijason
HD 2013 RGU.

Just finished an install of the RF 300x4 amp with Biketronics 7.1 Titan II speakers in the front fairing and Alpine SPR-60 speakers in the rear tour pack pods. I kept the stock HK radio. (fader also works fine)

The RF amp wiring kit made the install a snap....highly recommended!!
(plug and play) no wire cutting/splicing or soldering.
The Alpine speakers drop right into the rear pods without spacers or any mods. I had to drill new screw holes in the pods which took 10 min. to align and mount.
I bought all components separately from Biketronics, Amazon and Ebay for around $650.00 total.
The information from this website was priceless during the install and amp adjustment.
This was my very first stereo install ever.
I know there is no end to the audio setups with all the components and options available, but for $650.00 bucks, this setup sounds amazing!!
1 - 1 of 8 Posts
Were you able to mount the amp inside the front fairing?
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.