[ATrain]

Do any of you have a good run-brake-turn signal module? There is one from Badlands.

http://www.badlandsmotorcycleproducts.com/2008/Products/BETCSM.htm

I feel like I have almost gotten rear ended on several occasions.

 

[DragMan301]

I run this one, the flashing really draws attention: http://www.cyclevisions.com/lighting-accessories/the-flasher/

 

[MrWiggins]

we use those Badland ones at work all the time in our fenders and bags.. Really nice setup

 

[blacktopr]

I also went with all red on the baclk with stop turn tail

 

[TobyJ]

Do any of you have a good run-brake-turn signal module? There is one from Badlands.

http://www.badlandsmotorcycleproducts.com/2008/Products/BETCSM.htm

I feel like I have almost gotten rear ended on several occasions.

I just installed the Kuryakyn part, number 4859 on my 08 glide, and I like it. $55 from DK. I also used the Drag Specialties red lenses, PN DS280518, at $2.60 each. Install is super simple, and took all of about 5 minutes. They seem to have thought of about everything, and it is truly plug and play.

Toby

 

[BigDaveOnBass]

My '04 has the Kuryakyn part and HD red lenses. It was one of the first things I did to my bike when I got it.

 

[sportyguy69]

I just bought the run, turn, stop module from Harley Davidson. I am not a big fan of the running light feature. I found a step by step procedure to eliminate the run from the module. After I did the procedure on the module for my 07 Roadglide it made no difference. I still had the run feature. The funny thing is that I did the same procedure with the same module and put it on my 02 Fatboy. Everything worked fine, no running lights. Is there a difference in the wiring between a 07 model and a 02?

 

[sportyguy69]

Bump .....anyone?????

 

[joke]

DK's price is $72 now. Also only fits up to 2006 FLTR

 

[Lu]

I just bought the run, turn, stop module from Harley Davidson. I am not a big fan of the running light feature. I found a step by step procedure to eliminate the run from the module. After I did the procedure on the module for my 07 Roadglide it made no difference. I still had the run feature. The funny thing is that I did the same procedure with the same module and put it on my 02 Fatboy. Everything worked fine, no running lights. Is there a difference in the wiring between a 07 model and a 02?

I highly recommend the TailStopper from Biketronics. If the rear turn signals had two filaments, like the front, then then I would use the HD module, but since the rear has only one filament, it is hard to distinguish from the running light feature and when the brakes are applied to make them glow brighter.

The TailStopper only eliminates the running light feature on the turn signals only. That way when you apply the brakes, they turn on, making it very easy to distinguish, and in my mind, for whoever is behind you easier to be seen when you are braking.

http://www.biketronics.com/products/BT-400-TailStopper.html

Hope this helps.

 

[OldNerdGuy]

I run the Kuryakyn module, with a Bright A$$ Lights tail light. I run the markers in steady brake mode, and let the BAL Flash like crazy. It IS an attention getter.

Next up, LED's for the front, and more on the Tour Pak. I bought it with the TP LED Spoiler, have the side LED's on order. I need something for the back, but $500.00 for the HD LED TP Lights is way toooooooo much.

 

[DreamRider]

Bright!

Do any of you have a good run-brake-turn signal module? There is one from Badlands.

http://www.badlandsmotorcycleproducts.com/2008/Products/BETCSM.htm

I feel like I have almost gotten rear ended on several occasions.

ATrain, check out this thread:
http://www.roadglide.org/showthread.php?t=2950
Let me know what you think!

 

[flx50]

Guys, I have a question.
I just installed the Harley run/brake/turn module on my '06 RG. I really like the extra lighting out back. Now for the question.. With the module installed, both rear turn signals light up in running light mode when I turn the ignition to accessory. I never noticed this before the module.
Thoughts?

Thanks in adance.

 

[Grizzled Wizard]

H-D tail/turn light kit

I got the H-D kit at the dealer. No more money than the Kuryakyn. Install was so easy I thought I missed something - literally plug and play in harness under seat of 2006 RG. changed to red lenses supplied in the kit - not extra to buy. There is a good difference in brightness between running light mode and brake mode. I like it and am happy with it.

 

[spshult]

LED brightasslights . you cant go wrong

 

[Cheesehead]

Installed Kuryakyn LED TAIL/RED SIGNAL KIT.this has the run/brake/signal and flash feature. Signals flash amber even thought the units are otherwise red. These are really bright and certainly improve rear safety.

 

[unbalanced]

On 2 of our bikes we run the HD turn signal kit in addition to
the brightasslights taillight. Do not have any issues with tailgaters. Tailight is pricey, but when we need em we just wait for a 15 or 20 off sale and pick em up.

http://www.brightasslights.com/site/

 

[flx50]

Guys, I have a question.
I just installed the Harley run/brake/turn module on my '06 RG. I really like the extra lighting out back. Now for the question.. With the module installed, both rear turn signals light up in running light mode when I turn the ignition to accessory. I never noticed this before the module.
Thoughts?

Thanks in adance.

^^^BUMP.. Has anybody experienced this with an H-D module?^^^
Thanks!

 

[Bigdaddymike]

I use Badlands, it includes an equalizer and does not get hot because it is ceramic.